2004 Rhino Ag Equipment TW120

2004 Rhino Ag Equipment TW Series TW120

TW120 and TW144 are ideal for pasture maintenance, orchard applications, shredding stalks, or cutting material up to 2" in diameter. The TW168 is built tough to shred stalks efficiently, including corn, cotton, milo, and vegetable crops with less maintenance costs than conventional flail units.

The TW Series are available as a three-point lift or pull-type model and 540 or 1000 RPM to fit a wide range of tractors. The center gearbox features splined input and output shafts and tapered roller bearings for added durability and longer service life. The gearboxes and Cat 4 driveline are protected from sudden shockloads by an adjustable slip clutch on the main driveline and by torque dampeners on both side drives. All feature a heavily-reinforced, 10-gauge top deck with rounded-edge design for enhanced appearance, easy clean-off, and added strength. Tall, 1/4" thick side skirts and an obstruction-free underside allow high volumes of material to flow easily through the cutting chamber. Standard pan blade carriers, updraft blades, and a 4" blade overlap help assure a smooth, even cut. Rhino® Quality and Toughness make the TW120, TW144, and TW168 excellent choices!

Features may include:

• Slip-Clutch Protection

• Torque Dampeners

• CAT IV Driveline

• 10 Gauge Deck

• 1/4" Side Skirts

• CAT 2 & 3 Quick Hitch, Pull-Type

• Farms

• Ranches

• Orchards

Industry-leading toughness. Industry-leading warranty.

Rhino products are built to take on whatever you can throw at them. But if something should break, you’ll be glad to know our warranties are just as strong. See your local Rhino dealer for complete details.

The TW120 cuts a 120" swath of material. The center gearbox, rated at 120 HP, transfers power to the 100 HP outboard gearboxes. Torque dampeners on both sides of the center gearbox help minimize driveline and gearbox damage caused from sudden shockloads. Massive 2-3/8" diameter output shafts in the outboard gearboxes help provide optimum service. The pulltype unit requires a 50 HP (min.) tractor and the lift-type unit requires a 60 HP (min.) tractor (with adequate front weights).

Double torque dampeners on both side drives help cushion sudden shockloads on the gearboxes and drivelines.Gearbox strength and durability are enhanced by the 1-3/4" splined shafts and tapered roller bearings. The gearboxes and drivelines are fully-shielded for added safety.

Easily-adjustable slip clutch - All TW's feature an easily-adjustable slip clutch and a Cat 4 driveline. The center gearbox is rated at 120 HP.

Rhino quality and toughness - Rhino Quality and Toughness are built into every TW mainframe. The 10-gauge top deck is reinforced with formed channel bracing. The rolled-edge design adds both strength and eye appeal. The gearboxes and the threepoint hitch lugs are mounted to the frame, not the deck, to minimize downtime.

Deck bracing - The design and the amount of deck bracing found on the Rhino TW120 and TW144 makes the Rhino deck weldment one of the strongest in the industry. The deck is braced side to side and front to rear to help provide years of service.The pull-type units feature dual control rods. The use of dual control rods provides greater load carrying capacity and helps evenly distribute the weight of the cutter to both sides of the tongue and rear axle. Compare this to some competitive cutters that only use a single control rod design where all the weight is concentrated on one side of the tongue and axle.