2021 New Holland Duradisc™ 210M

MoreLess
Limited Time Offer!

Selling Price -

New Holland Duradisc™ 210M

DEPENDABLE, CLEAN CUTTING WITH TIME-SAVING CONVENIENCE

Forage quality directly influences livestock weight gain and milk production. Maximize the return of your hay field with improved forage quality and tonnage by choosing the clean, uniform cut that begins at the MowMax™ cutterbar of New Holland DuraDisc™ heavy-duty disc mowers. By cutting closely and cleanly, DuraDisc mowers leave less crop behind to increase tonnage with every cutting to boost weight gain, milk production, and ultimately the profitability and success of your operation.

FOUR MODELS

DuraDisc mowers breeze through the toughest conditions to give you a clean, even cut, pass after pass. Choose the side-pull model with a 10’4” cut or from three mounted models with cutting widths from 6’8” to 9’2”.

DEPENDABILITY AND CONFIDENCE – MOWMAX™ CUTTERBAR ADVANTAGES

Disc mowers are the first machines to hit the hay fields. Dependable and confident operation comes standard on DuraDisc™ mowers. The MowMax™ cutterbar is backed by the 3-year factory MowMax™ cutterbar warranty for your peace of mind. Each MowMax disc module is an individually sealed gear case with a dedicated oil reservoir so gears always stay lubricated, even when working on hillsides. Each module features a ShockPRO™ hub that absorbs harmful impacts and protects the cutterbar drive if the mower hits an obstruction.

ADAPTS TO ROUGH FIELD CONDITIONS

A large-diameter flotation spring on DuraDisc Series mounted mowers allows the cutterbar to ride smoothly across the field. In addition, a spring-loaded breakaway latch allows the cutterbar to swing back if it hits an immovable object in the field.

Features may include:

DURABILITY, CLEAN CUTTING, LESS DOWNTIME.
  • You can depend on rugged DuraDisc™ disc mowers to slice through tough conditions, mow smoothly and quickly, and give you the peace of mind you only get with the MowMax™ cutterbar.
WITH MOWMAX™, YOU MOW WITH CONFIDENCE
  • DuraDisc disc mowers give you the advantages and latest advances of the New Holland MowMax™ true modular cutterbar, including:
Closer cutting
  • The low-profile rock guards allow for closer cutting at a flatter cutting angle.
  • Stepped module spacers improve the straightness of the cutterbar, allowing it to run more lightly and smoothly for consistent cut height, more uniform flotation and less wear.
  • Extended durability
  • The top cap bearing fits securely to the housing to extend bearing life.
  • Dampeners on the hardened alloy module drive shafts eliminate vibration wear.
  • Strong top cap gear and the ShockPRO™ hub design eliminates the need to change top cap gear assemblies if there is impact from a foreign object.
SHOCKPRO™ HUBS KEEP YOU MOWING AND PROTECT YOUR INVESTMENT
  • New Holland’s MowMax™ cutterbar. It is equipped with the ShockPRO™ cutterbar protection system—the same design used on Discbine® disc mower-conditioners—so you are assured of maximum durability and peace of mind, season after season. Replaceable, economical ShockPRO hubs help keep you mowing with minimum downtime and repair costs. They protect the entire cutterbar driveline if the machine encounters a field obstruction by absorbing the shock of the impact before damage can occur to expensive drive components. If necessary, these hubs can be replaced in the field in less than 10 minutes, at minimal cost.
  • 2021
  • New Holland
  • Duradisc™
  • 210M
  • Disc Mowers
  • Shaft spline: 6
  • Minimum required: 60 (44.7) hp (kW)
  • Disc: Bevel gears in sealed modules
  • 27 x 9.5 x 15 6 PR
  • Disc: 3000 rpm | Input: 540 rpm | Maximum transport: 20 mph/ 32.2 kph
  • Circuits required: Two remotes
  • Relief required: 1500 (103) psi (bar)
  • Drawbar clevis hitch
  • Cutterbar tilt angle degrees: -2 to -10 | Cutterbar operating range degrees: +18 to -28 | Disc cutting diameter: 19.7 (500) in. (mm) | PTO Size required: 1-3/8"
  • Cutting: 0.95-3.2 (24-81) (mm)
  • Swath , approx standard: 95 (2413) in. (mm)
  • 183 (4648) in. (mm)
  • 196 (4978) in. (mm)
  • 10'4" (3.2) (m)
  • 62 (1575) in. (mm)
  • 2610 (1186) lb. (kg)
  • Cutterbar gear protection: Std. ShockPRO™: easy replace ShockPRO hub with a partial complement of sacrificial splines | Driveline protection: Slip clutch
  • Cutterbar flotation: Vertical and lateral, adjustable springs | Number of discs: 8 | Belt tension: Spring-loaded tensioner with adjustment gauge
  • MowMax™ cutterbar, modular, with individual sealed reservoirs
  • per disc: 2
  • HBJDD210JLN071531
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • Mount Pleasant, Texas
  • Pre-Owned
  • 3694
  • 2021
  • New Holland
  • Duradisc™ 210M
  • HBJDD210JLN071531
  • Red
  • None
  • Available
  • Swath , approx standard: 95 (2413) in. (mm)
  • Cutting: 0.95-3.2 (24-81) (mm)
  • HBJDD210JLN071531
Advertised pricing excludes applicable taxes title and licensing and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.